Pool models, construction conditions and care to help you plan your project.
In this guide 4
Application note: Chemical doses, pH/chlorine targets, operating times and maintenance intervals are determined according to the product label, measured water values, the usage class and local requirements. Numerical examples alone do not constitute application instructions. Chemicals must never be mixed with one another; electrical work, pressurized equipment and pool draining operations must be carried out under expert supervision. Unless stated otherwise, the figures in this text are example assumptions for planning purposes.
Along the Black Sea coastline, winter can arrive with harsh winds and storms; for wind speed values specific to the region, local meteorological data should be consulted, and this guide does not claim any regional speed figure. Securing a thin polyethylene tarpaulin bought from a hardware store by lining its edges with bricks or stones is a common solution, but it is aerodynamically weak: the tarpaulin can balloon under a sail effect and tear at its attachment points, the stones lined along the edge can fall into the pool and damage the liner, and dirt, leaves and mud can fill the pool. The Porous Polypropylene Mesh Safety Cover used in the Sermed Pool winterizing set aims, thanks to its micro-perforated structure that lets wind pass through it and its stainless steel coil spring ground anchors, to behave noticeably more durably in severe weather conditions than conventional closed tarpaulins.
In storms experienced along the coast, standard nylon tarpaulins with weak tensioning and anchoring can balloon under the sail effect and tear. The Sermed Pool winter cover is produced from porous polypropylene mesh fabric; it lets part of the wind pass through and filters melting snow water, reducing the build-up of collapse-inducing weight on top of it. Pop-up brass sockets embedded in the surrounding concrete and stainless steel coil springs help absorb storm impact energy by flexing. The cover's actual performance should be assessed together with correct anchor spacing, appropriate tensioning and regular inspection.
Rather than resisting the wind with a completely sealed surface, using a surface that allows part of the wind to pass through is a more durable approach. The mesh cover is built on this fluid mechanics logic.
01. The Physics of the Sail Effect: How a Closed Tarpaulin Becomes Overloaded
The mechanism by which conventional closed tarpaulins tear in winter:
- Positive and Negative Pressure Difference: When wind flows rapidly over the tarpaulin, a relatively low pressure forms above it; the tarpaulin balloons upward, behaves like a large sail and can tear at its attachment points.
- Water and Snow Accumulation (Collapse): Rainwater collecting on a non-perforated tarpaulin forms a pond. The magnitude of this load depends on the volume of accumulated water: as an example, water collected to an average depth of 5 cm over a 32 m² cover amounts to roughly 1.6 m³, that is, approximately 1.6 tons of weight. A load of this kind can make the tarpaulin collapse into the pool and tear off its hooks.
- Light Transmission and Algae: Because transparent or very thin covers transmit a significant portion of sunlight, algae growth in the water can continue throughout the winter.
02. Polypropylene Mesh and Stainless Coil Spring Technology
The 3 engineering components that determine the strength of the Sermed winter cover:
- Micro-Porous Mesh Fabric:
The woven structure contains a large number of micro openings per square metre. Part of the wind passes through the fabric; the sail effect seen with a closed tarpaulin is largely reduced. Rain and melting snow water filter into the pool, while coarse debris such as leaves and twigs remains on top of the cover. - Stainless Steel Coil Springs:
At the end of each tensioning strap there is a heavy-duty stainless steel spring. During storm impacts the springs flex and absorb impact energy; this helps reduce sudden shock loads on the fabric and the ground anchors. - Brass Pop-Up Ground Sockets:
The brass sockets embedded in the stone paving around the pool are closed in summer so they sit flush with the surface, reducing the risk of tripping during barefoot use. In winter they are raised with a screw and the springs are attached.
03. Standard Nylon Tarpaulin vs. Sermed Mesh Safety Cover Comparison Table
| Feature / Criterion | Standard Nylon / PVC Tarpaulin | Sermed Mesh Safety Cover |
|---|---|---|
| Behaviour in a Storm | Can balloon and tear under the sail effect | Part of the wind passes through it; the sail effect is noticeably reduced |
| Rainwater Accumulation | Can pond on top and collapse | Filters water through; the accumulated water load on top is greatly reduced |
| Safety for People and Children | Anyone stepping on it may sink in | When tensioning and anchoring are installed correctly it has a load-bearing capacity; the load-bearing value depends on the product's written technical conditions |
| Service Life | Typically short; fatigues quickly under UV exposure | UV-resistant polypropylene; service life depends on climate, storage and maintenance conditions |
| Spring Water Cleaning | Muddy water can mix into the pool | Retains coarse debris; the cleaning workload at opening is reduced |
Conclusion: When installed with correct anchoring and tensioning, a mesh winter cover is an effective component that protects the pool against winter conditions; it is not a safety solution on its own.
Frequently asked questions
Does a mesh cover let sunlight through?
Mesh fabric blocks a significant portion of light but is not completely opaque; transmittance varies with the weave density and the colour. Reduced light slows algae growth, but it cannot be said to reduce chlorine requirements to zero over the winter. Water values must also be measured periodically during the winterizing period and treatment carried out according to the product label.
How long does it take to fit and remove the cover?
Thanks to the special installation rod, the springs are quickly attached to the brass sockets. As an example planning assumption, the operation generally takes a short time on a pool measuring 4×8 m; the actual duration varies with the number of anchors, weather conditions and the number of people working, and is not a guaranteed time.
Will it support a child or pet that falls onto it?
Safety covers are designed to support the load stated in their written technical conditions; this scope applies with correct anchoring, correct tensioning and fabric in flawless condition. The cover does not replace a physical barrier or adult supervision and does not provide zero drowning risk. Children and pets must never be left on the cover under any circumstances.
Will the socket holes crack the marble?
The holes are drilled precisely with a diamond core bit using a wet system. With the correct equipment and experienced workmanship the risk of damage is low; even so, the type and thickness of the stone and any existing cracks should be checked on site before installation.

Fiplus ↗
Maldiv ↗
Bora ↗
