Pool models, construction conditions and care to help you plan your project.
In this guide 4
Project note: The base thicknesses, concrete classes, reinforcement, excavation allowances, pipe diameters and quantities given in this guide are preliminary planning examples; they do not constitute a structural design that can be applied to every site. A design must be prepared by a qualified engineer after evaluating the geotechnical investigation, groundwater, loads and local rules. A full pool can also be affected by external hydrostatic pressure; when the external water level rises above the internal water level, liner floating can occur even in a full pool. Draining, drainage and electrical work require expert supervision.
The point on which consumers most often go wrong when signing a pool contract is assuming that the "25-Year Warranty" line in a brochure covers every single part of the pool, from the pump motor to the lights. A rotating electric motor, or a gasket under constant chemical exposure, should not be expected to carry the same scope of assurance as a long multi-year shell warranty. A clear and comprehensible engineering contract separates the load-bearing shell warranty, the interior lining watertightness warranty and the mechanical equipment warranty into distinct, explicit clauses. At Sermed Pools we use a tiered structure in our contracts: 25 years for the Fiplus F-Stone shell, 10 years for the Maldiv and Bora steel casing, and separate periods for the liner lining and the mechanical/electrical equipment. For each item we state the duration, the scope and the user's obligations together with the written conditions. The periods given here are subject to the written conditions in the relevant contract and warranty certificate; they do not amount to an unconditional assurance against situations such as hydrostatic uplift, earthquakes, ground movement or application contrary to the design.
A contract is not for the good days; it is the legal shield that protects each party's rights when a problem arises. A contract whose clauses are clearly written is the most tangible document of trust.
01. Contract Pitfalls: The "All-Inclusive 25 Years" Expectation and the Real Limits of a Warranty
Disputes that arise from vague contracts which mislead the consumer:
- Confusing the shell with the pump: A "25-year warranty" statement with no written scope leads to disputes between the parties when a wearing part such as the pump fails. Which period belongs to which component must be set out in separate written clauses in the contract.
- Hiding the user-error conditions: If it is not clearly written in the contract that the pool must not be left empty over winter, or what the pH limits are, uncertainty arises about the cause of a failure; user obligations must be defined in measurable terms.
- Authorized service and parts commitments: If local service access and spare parts supply are not defined in the contract, it remains unclear how the warranty given can actually be used in practice.
02. The Sermed Pools Three-Tier Warranty Architecture: Shell, Membrane and Mechanical Equipment
The three clear distinctions set out in the Sermed Pools warranty certificate (all subject to the written conditions in the certificate):
- Fiplus F-Stone shell (25 YEARS): For the shell made up of 20 mm F-Stone fiber cement panels, this is a 25-year replacement/repair assurance tied to written conditions. The load-bearing action of the panels works together with the galvanized steel external cross braces, which are a separate element. For the special-alloy steel casings of the Maldiv oval and Bora round models this period is 10 years. Warranty coverage depends on providing a foundation, backfill, drainage and operating conditions in line with the design, and does not include an unconditional commitment against hydrostatic uplift or earthquake damage.
- Liner watertightness (10-YEAR CONDITIONAL PROGRAM): Either a 0.8 mm homogeneous liner or a 1.5 mm reinforced membrane is used as the lining; the project is carried out with one of these options. The watertightness assurance applies with the tiered contribution rates defined by year in the certificate, and on condition that the pH/chlorine limits are observed.
- Mechanical and electrical equipment (2 YEARS): For the circulation pump, filter body, transformer, LED spotlights and electrical panel, a 2-year spare parts and service scope applies in line with the manufacturer's/supplier's conditions.
03. Warranty Items: Duration and Scope Matrix
| Pool component | Warranty period | Scope detail | User obligation |
|---|---|---|---|
| Fiplus panel shell | 25 YEARS (subject to written conditions) | Panel integrity and load-bearing capacity; on condition of application in line with the design | Compliance with the designed foundation and concrete detail |
| Maldiv / Bora steel casing | 10 YEARS (subject to written conditions) | Corrosion and frame separation in the special-alloy steel casing | Correct backfilling |
| Liner lining | 10 YEARS conditional | Watertightness and welded seams | Leaving the pool full over winter, pH 7.2-7.6 |
| Pump and control panel | 2 YEARS | Motor failure, panel faults | Presence of a 30 mA residual current device |
| Filter tank | 5 YEARS | Cracking of the tank body | Not exceeding the working pressure stated on the manufacturer's label |
Conclusion: An honest contract sets out the warranty for every part together with its name, its duration and its conditions. That way it is clear from the outset which risks your investment covers.
Frequently asked questions
In a pool contract, how is the shell warranty separated from the mechanical equipment warranty (pump, control panel)?
The shell warranty is the 25-year assurance (10 years for Maldiv/Bora), tied to written conditions, for the panel and casing system buried in the ground. Electrical parts such as the pump, filter and LEDs, being mechanical equipment subject to wear, are set out in a separate clause with a 2-year scope.
How is the warranty certificate valid in Georgia?
Contracts are drawn up in the languages agreed by the parties, in accordance with the consumer and contract legislation in force in the country where the work is carried out. We recommend that the clauses on the competent court, the applicable law and the address for service be clearly written in the document.
Does the shell warranty become void if the pool is not winterized?
Draining the pool improperly and allowing groundwater to lift the shell or the liner may be considered a breach of the user obligations defined in the contract. In addition, because liner floating can occur even in a full pool when the external water level is above the internal water level, drainage and groundwater control are important. For that reason, following the winterizing instructions is decisive for keeping the warranty coverage in force.
What happens to the pool frame after 25 years?
Because F-Stone fiber cement panels are inorganic in structure, they are resistant to organic decay; over the long term, the component typically expected to be renewed first is the liner membrane. Even so, the service life of the shell depends on the quality of the application and on the ground and water conditions, and does not imply an automatic warranty for any particular additional period.

Fiplus ↗
Maldiv ↗
Bora ↗
